Sorted out the wiring loom to the rear and removed some of the 42 years worth of after-market "improvements"
I'm 6ft 2" so i've gone for seats that fit me and i'll alter the car around those!
I've ended up with Black cobra bucket seats from Moss in Bristol. My sons seem to approve!
As you can see on the last pic, the seats are quite high so i decided to bite the bullet and fabricate lowered seat pans:
Made from 1.2mm steel with a 3mm steel H-style sub frame welded in for strength and rigidity, then seam sealed & painted with Chassis Black and bolted AND bonded to the floor (with large load spreader plates) all along front and rear edges and screwed in down the sides just to be doubly sure.