Hi Simon.
No problem at all. Would be good to meet up at some point. Might even if the weather is good, see Matt about in his 5EXI turbo.
Mine at the minute is nothing to look at ( though hopefully this will change within the next couple of weekends. As it's back in bits again at the minute.
You should be fine with the standard rad. Worked ok with mine.
When you refill the system, run the engine with the expansion cap off. Until the fan has cut in twice. This makes sure it has bled ok.
Also you may have ordered the wrong one.
Get Ad rad to measure the bottom mounting pins. 5mm may not sound a lot but it's the difference between fitting and not.
|