Marlin Swirl Pot
What is the suggested order of the 4 fuel pipe connections to the swirl pot. Is the swirl pot just a single volume tin can or is it cleverer than that and subdivided. If it's the former I guess the order doesnt matter too much so if the connectors are numbered 1 to 4, bottom to top then prehaps I could connect up as follows:-
1 - feed from the tank via the low pressure pump
2 - feed out to high pressure pump and fuel rail
3 - return to the tank
4 - return of unused fuel from the fuel rail
Would that work or am I over simpifying it.??
Thanks for your thoughts
Nigel
|