View Single Post
  #6  
Old 29th November 2015, 21:41
peterux's Avatar
peterux peterux is offline
Senior Member
Enthusiast
 
Join Date: Mar 2005
Posts: 3,074
peterux is on a distinguished road
Default

My balljoints were tight due to weld splatter but OK once I'd cleaned up the threads. I came to the conclusion that genuine Quinton Hazel ones were the best quality. (I think QH are now bankrupt but there are still old stock around).

My second set of wishbones (after the wishbone recall) didn't fit like yours. I tweaked the wishbones by putting a threaded bar through the bushes and spread the wishbones with some nuts and washers on the inside. It was quite easy to adjust them to fit, but it may be best to check with the factory to see what they recommend.

...peter
Reply With Quote