Thread: Dual 7" Servo
View Single Post
  #641  
Old 23rd July 2012, 16:00
Stuart Stuart is offline
Senior Member
Enthusiast
 
Join Date: Dec 2005
Posts: 203
Stuart is on a distinguished road
Default

Quote:
Originally Posted by peterux View Post
When I was installing my dual diaphragm brake servo I noticed that the pedal box side deforms and twists when I press my clutch.
My pedal box uses the BMW e30 clutch master cylinder.

I'm thinking of adding a supporting bracket on the battery box similar to Ian Morris' installation....

http://www.flickr.com/photos/58068042@N07/6696285663/

Can you get a picture of where yours has failed?

...peter
Peter

The weld around the tube the pedal bolts through has given way also the only strengthening brace has buckled.

Not a good picture but I hope you can get to see the issue.



I have sent it away to be welded and have some extra strengthening fillets fitted if it still flexes when i refit then I may well look at Ian's resolution.

I have also now ordered a BMC4052 Master Cylinder through Brakes International bargain at 38

Stuart
Reply With Quote