Thread: Dual 7" Servo
View Single Post
Old 23rd July 2012, 20:17
Patrick's Avatar
Patrick Patrick is online now
Senior Member
Join Date: Feb 2005
Location: Hampshire
Posts: 2,466
Patrick is on a distinguished road

I also strengthen the pedal box a lot:

The metal the throttle pedal sits resembles tinfoil. The clutch pedal assembly just didn't work, so I installed a willwood master cylinder and the cage for the master cylinder taking the stresses away from the pedal box:

See the smaller nuts inside the ground cable loop and towards the front - thats where the cage is bolted to. There is a thicker plate on the top to re-enforce the area.

You can see the clutch master installation here:

I'm considering options to change the whole thing to a properly design and tested pedal box system, but not had enough time to look into it recently.
Reply With Quote