Bit more work on the doors ...saddles made to accept Grahams latches and the dovetail style catches fitted as well ....a piece of 2mm plate was cut to shape and fitted to the rear of the B pillar , this will be tied into the frame when I've finished fettling in that area ...
Saddles are made from 2mm plate as well and stand about an inch proud of the location on the frame so this style of latch is accessible in the door from outside fairly easily , but not intruding on valuable cockpit space ....the large Landrover style dovetails take up the space in the shut perfectly ...Glan made the shuts so that a standard slam style latch could be used or , if required or desired , a bearclaw style latch and pin will still fit in the space easily ...