View Single Post
  #10  
Old 13th June 2013, 21:01
MadDogMoggy's Avatar
MadDogMoggy MadDogMoggy is offline
Senior Member
Enthusiast
 
Join Date: Feb 2008
Location: Dorset
Posts: 107
MadDogMoggy is on a distinguished road
Default

I had another quick play yesterday evening.

The switched live that feeds the heater had blown its fuse, so the heater wasn't working. Replaced it with a larger one (went from 10A to 15A). This stopped the O2 heater error!

Voltage of the sensor (bizarrely) is back to fluctuating between 0.01v and 0.23v. Not sure why it was reading 0.2 to 0.5 at the weekend.

Riachard - any reason why the relay didn't work? I was thinking of using the original switched live to operate the relay (earthed directly, not through the ECU) and then have a direct feed from the battery through the switched part of the relay to the heater, again earthed to a suitable earth point.

Cheers
Tim
Reply With Quote