Molleur - Thanks.
As long at the car ends up looking better than when I started I will be happy.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Thursday Evening:
Not much time available after work, but I know the key is to at least do something, as all jobs count.
First job was to remove the headlight and indicator from the passenger side.
Then I cut the zip ties holding the wiring in place so I can paint this area before re-fitting the lights.
( First photo taken before the indicator wiring was disconnected. )
Then it was time to get the angle grinder out…
As I needed to clean up some excess filler / fibreglass around the light holes on the driver's side.
Plus I wanted to 'thin out' the excessively thick depth around both the front wheel arches.
Before:
After:
But that was enough noise and mess for one evening.
So until next time, take care, Paul.