Part 2
I then spend a lot of time working out the best route for the wiring loom to connect everything up behind this section of dash.
I was just starting to carefully push the dash section back into place...
When my
Spyder Senses started tingling, as the temperature dropped and the sky went dark...
Thankfully I was just fixing the cover in place when the rain started and within a minute of getting inside it absolutely hammered down!
Unfortunately, other stuff & the weather got in the way for the rest of the day, until I was able to do a bit in the Summer House.
I marked up and drilled out the holes required for the fixing pins of my 1500 badge.
Eventually, the badge will go here.
But first I wanted to give a final coat of paint to the panel itself, after masking everything else off.
I also gave the panel for the heater controls a final coat while I was at it.
Hopefully I will get a bit more wiring done over the weekend.
So until then, take care, Paul.