[Paul L]

Sweaty Tuesday - Part 3:
When I returned to the car, the normal filler was sanded down…



And the etch primer came out.









Next I sanded down the bonding paste around the outside edge of the grille.





My belt sander has been playing up a lot lately and "ate" four new belts while doing this work.



The good news was that this all felt very solid.

But the real test was to see if any paste had leaked into a visible part of the grille...

And the really good news is that it is all safely tucked in behind the lip of the bonnet opening.





And there is a big improvement on the passenger side of the opening, that I widened earlier.



End of Part 3…