Quote:
Originally Posted by Paul L
Can I ask a daft question, are the bolts just biting into the fibreglass?
|
The bolts go straight through and then have large penny washers, spring washers and a normal nut on the back.
Obviously it helps if you have a small child to-hand to assist with tightening things up!
Note: While my son was doing the test-run with me on this, i spotted that the rear deck really is quite thin and flexible! Had i spotted this before i fitted the shell then i would have glassed some bracing on the back. But as it stands, and with no wish to upside-down Fiberglas with everything in place, I'm going to have to have a ponder....