Much work has been completed over the passed few days.
As you can see in the photo the front lower grill and main grill are now finished and fixed in place.
The inner wing flanges are screwed to brackets welded to the outer edges of the lower grill.
The main grill is fixed to an internal steel band, this in turn is braced to the bulk head via 30x30x3 RSA which provides a edge for the freshly "adjusted" bonnet to rest against.
The truck also had it's first trip outside so I could get a full photo shot.
Although it sits square and looks good I feel it would look better if the front springs were lowered a few inches.
