Well, I've got the loom tape from CBS, along with a roll of self amalgamating to finish off the ends of the loom tape.
I've also cleaned up the loom somewhat before stripping off the old sheathing.
Thing is, I've got some odd connectors on the end where the large white(ish) connector for the ECU is.
One of them is a three conductor one, and looks factory fit. The other is a double conductor snap together block (male and female ends of a multiway block) but only has one conductor in it. It has a blue wire from one direction, and a brown from the other. This looks a little odd - does / did anyone else have one of these? I'll try and get a photo of it tonight.
I'm tempted to just leave it as is - apart from making a more permenant connection which can be buried under loom tape and forgotton about.
|