Redid the passenger door handle rod yesterday and have to say it was much simpler and quicker now I had it sussed from the drivers side. Also the wire rope grips make it much easier to fit.
Door card back on the passenger side.
Bit more tidying up of the inner door area with some matt black paint then I just need to get the drivers door card on. Aiming to get it MOT’d next week - hopefully should be ok. Main areas of concern are the headlight alignment due to how I’ve mounted the Golf MK2 lights and bonded then into the headlamp cowls in the bonnet (I have aligned then as much as I can at home) and the handbrake efficiency which seems to be problem with rear callipers on all MR2 Roadsters from what I can see.
Will post an update on progress once it’s booked in.