Hi Craig.
I have no valve in my system.
OK things to try:
Make sure the clutch and lever are ok. You will have to get a measurement off one of the other honda guys of how much the slave lever moves to engage clutch. Then try it by hand. As it gets stiff (this is the clutch engaging) you might need help levering it further.
When you tried the above, what were the bubbles doing in the clear tube at the slave when the pedal was being pressed? Going towards the jar or back towards the master cylinder? I know the above is a long winded process with the dancing of feet and spanner at either end, but found that's the only way that works. Not tried the vac bleed but heard it's works great.
I wish I was closer otherwise I would give you a hand.
|