[pompeyal]

Next was to prep up for adding filler, I applied filler primer around where I was to fill to give a bond surface for the main filler and allowed to dry. When it had a good day to dry I then started to apply around the open areas in the bulge and over the fixings until enough filler was in position ready for the next stage.















I left the filler to go off and started to rub it down into shape..





When enough was taken back to get the shape a coat of filler primer was sprayed over the filled areas, this shows the uniformity of the shape and imperfections..









Next when the primer has had a good time to cure I will go back over with filler to cover the areas I have missed and fill out where the shape is uneven…