Kilmo,
they do indeed look all the same. Rover 216 because that is what Mark at Marlin used to design and build his K series 5exi (another version uses the 'T' series 220 BHP Turbo engine).
Therefore you will need the gear linkage off the 216 and the rear hub assemblies to use on the front wheels.
Now this is where I get a little unstuck myself as i have the 218 VVC and don't know if i can use my rear hub assemblies (I know I can't use the gear linkage as it is different).
Other than that everything else is off the 'Bubble' 200 or th eRover 25.
Hope this helps.
Mike.N
|