Quote:
Originally Posted by aofb
Wheels are on (so I can assess how much they need banding / spacing) and I've trial fitted the front end.
The front end is sagging to one side slightly (due to a failed spring on that side and a bit of natural warpage (the kit is a good 2-3 years old at least), which disturbs the shutlines at the doors and the bonnet. Luckily with some expert jacking all of this falls back into place nicely.
|
Famous last words.....
Failed spring took an investment in new kit (Blowtorch, air grinder) and many hours of swearing (at least 6!!), plus a new shock absorber to resolve. Still got another one to do but that'll wait.
With all of that in place, the front end sits absolutely sod all like level - lines up great at the NSF wing and both front end corners, but the OSF wing is a good 2-3mm inwards and a good 10mm too high, at best it's a good 5mm too high but wont bend any more so no chance it'll bend out alone. Looks like I'm going to have to relief cut and / or just cut the section out and patch it. Bugger! I wanted to learn GRP repairs on non-critical stuff really...
I'm intending to get all nerdish on it this weekend and check alignment of everything to a decent degree (+/- 2mm), but I suspect it'll tell me what I already know.