View Single Post
  #1  
Old 8th March 2019, 15:17
ah_sprite ah_sprite is offline
Junior Member
 
Join Date: Sep 2010
Posts: 5
ah_sprite is on a distinguished road
Default Another 250SWB Coupe build

Hi all,
Thought I'd introduce myself on here. Have just started building a 250SWB as I've been lurking for quite a while!



A few questions to start us off - filler neck - what sealant have people used to bond the neck into the existing Z3 neck? Also, what have you all done about moving the vent up to the top of the filler neck? No problem with drilling a hole in the side of the Aston neck setup as used on most cars, but what's the best way to blank off the old hole?

What have you all done regarding sealing the 'cabin' over the rear arches - obviously the tub doesn't come in contact with the Z3 'inner wings' so need something to fill the void.

Be prepared to be inundated with stupid questions

Cheers
Richard

Last edited by ah_sprite; 8th March 2019 at 15:21..
Reply With Quote
Available from eBay