Thanks, I can see that I'll have a problem with my frames (the top corner is touching, and the other top corner has a 12mm gap - so I'm thinking I'll have to do a lot of re-working. I had planned on getting them nickel plated (rather than chrome), but had to put some rust killer on them today, as the rust was 'taking a hold' I think I may paint them now.
Ref my build, I've just finished extending the front inner wings (using galvanised steel mesh, and fibreglass. Fixed using the 3 original fixing bolts at the front, and some rivnuts (never used these before, so it was a learning experience - the tool has to be unscrewed after use, so not that quick to use). At least the weather's been good - oh I was sidetracked with tarting up the disc brakes, the backing plate and outer edges of the discs are now a nice gloss black.
|