Thread: Ozi 206 dino
View Single Post
  #66  
Old 16th April 2017, 16:52
ozi jim ozi jim is offline
Member
 
Join Date: Apr 2015
Location: Sydney Aust
Posts: 72
ozi jim is on a distinguished road
Default

The front I wanted removable brackets so that I have the flexibility to change roll centers further than the bracket allows by replacing it with another.

The lower arm inner joints are a fixed position, they go into a very simple jig which is a piece of ply with 3 holes drilled in the correct location to get the location of the 3 joints the same left and right.

The upper and lower sphericals are both 5/8 the housings I machined, all the left and right 1/2 rose joint adjusters I also machined.

The machined parts and tube work is all 4130 crome moly.

P3300059_57.jpg

P3300061_1_57.jpg
Reply With Quote