[/B]
Quote:
Originally Posted by 1iTim
Triumph! Pun intended! Springs from a local supplier. With the spax adjustable shocks from rimmer I can go 10" or 9" same height so I'll go with 10" 2 3/4 (70mm)ID 300lb/inch springs. Should give the bottom control arms level. I made 1/4" shims from aluminium for front camber but may not need them. I'll need to shim the steering rack about that too.
|
Hi Tim,
Can I just check please, you are using 300 lb springs? Are they going to be a bit stiff considering the car will be much lighter than Herald?
Thank you.