9th November 2017, 05:52
|
Senior Member
|
|
Join Date: Nov 2012
Posts: 845
|
|
Dash Saga
Quote:
Originally Posted by softfeet
I really like your dashboard - and the rest of the car!
I may have missed it, but what thickness / gauge of aluminium are you using for the dash? And what grade?
It is a balance between too thick (difficult to work, too heavy, difficult to install) and too thin (flexes when switches are used, etc).
Thanks
|
The alli from which my dash is cut was supplied by a friend who has a workshop. I sent him my own blank with the centres of all the holes marked with a punch with a list of the required diameters. Top bloke that he is, he cut it from a new 3mm blank of unknown (to me) grade. £27 all in!
I had considered doing it all myself, but the problems I'd encountered with my A352 dash (also 3mm unknown grade), especially the mammoth fag of cutting the two 4" holes, made up my mind.
Picture courtesy of Scottie22
At 3mm thick both dashboards are nice and rigid, especially once the clocks are fitted. As long as the fixings to the body are sound (and I'm a big fan of scuttle braces!) 3mm of any reasonably stiff grade will do the job.
Regards, Mick
|