after lots of cutting welding and grinding then cutting out the mistakes more welding and grinding I have just about completed he frame which included 14 frame to chassis, 8 earth tags, pedal brackets, steering column brackets, heater brackets, and I welded in some diagonal bracing bars on the side of the frame. The only place I could fit the heater was in the passenger foot well so a bit of extended wiring and trunking required there. the frame is up on blocks until the paint dries and so I can drill the rivet holes for the front lower bulkhead panels. so far so good
[IMG]
[/IMG]
[IMG]
[/IMG]