Quote:
Originally Posted by Mister Towed
Hi Gary, can you post the internal dimensions of your lowered floorpans please? I need the width, length and depth to see if my MGB seats will fit inside them or whether I need a complete rethink on the seat front.  |
Aaaargh ....forgot to do this before I rushed out the door to catch the post...
I know they are 460mm wide , just wider than a clubman classic....I think length was 590mm but need to check that - it is as long as it can be from just sitting up tight to the front floorpans and just shy of the rear outrigger leaving enough room to get a spanner/socket on the tie bar bolts should you need to remove them.
Depth was just a few mill less than the chassis rail depth at the rear , but it tapers upwards towards the front giving you a reclined pan...also they will be made with 3 layers of 900 sandwiching a bit of 6mm ply , so actual depth may be about 10mm less approx. but very strong......I will definitely get correct measurements tomorrow.
These are designed to fit in the Spyder either as drop ins or actual floor and will fit the Cordite too....