Stripped the stromberg 150 carbs down today ready to fit an overhaul kit which i need to order, the problem is the small id tag is missing and there's no numbers stamped on the carb body so will speak to the guys at Zenith Carbs tomorrow. Found a build up of lacquer and seized float valves, butter fly shafts are worn also a missing gauze filter on one of the float valves plus rounded/missing screws, me thinks a butcher has been at work.
IMG_4316.jpg IMG_4324.jpg
The carbs before i gave them a clean with petrol and the cleaned carbs.
IMG_4327.jpg IMG_4328.jpg
View into the float chamber were the petrol goes, you can see hard lacquer on the left image and after a quick clean with carburetor cleaner, its wonderful stuff.
IMG_4337.jpg
All the parts off one carb stripped and cleaned ready to re-assemble with new butter fly shafts and gaskets etc.