View Single Post
  #27  
Old 29th December 2020, 20:01
Lucky@LeMans Lucky@LeMans is offline
Senior Member
 
Join Date: Aug 2012
Posts: 2,142
Lucky@LeMans is on a distinguished road
Default

The local powder coaters have taken the chassis away today. Thats given me a bit of a chance to go over the engine and gearbox to see what's what. I've already rebuilt the heads and port matched the inlet manifold. That was a job worth doing as there was a step mismatch between the head ports and manifold ports of around 5mm at the worst point. I marked out the manifold and ground away the aluminium manifold until it all lined up. I opened up the plenum area under the carb too which is another trick I learned back in my Autograss racing days. I bought a set of tubular exhaust manifolds from ebay that should flow really well being a long branch three into one design with a 2 1/4" collector. A straight through system front to rear with a single cherry bomb will finish it off !

Last edited by Lucky@LeMans; 29th December 2020 at 20:05..
Reply With Quote