View Single Post
Old 31st May 2019, 13:50
Bellicose Bellicose is offline
Join Date: Feb 2019
Location: Essex
Posts: 61
Bellicose is on a distinguished road

More Welding and back on to foam work!

Well after a few weeks of not having the space to carry on with the project I have now been able to get some decent work done!

I mirrored the wire frame onto the passenger side and then started to clamp strips of fibreglass material to the wire frame. Once it was all clamped in place I covered the fibreglass in resin. Now this was done to give me a base to put the expanding foam on. It worked well, and meant I had a decent start with the foam and also pointed out a few problems with my design/framework.

As you can see, the "tunnels" behind the headrests are WAY too pronounced and it's starting to look like the Bat Mobile! Not what I'm trying to achieve!

But that's fine, I can build up the foam to lessen the effect of the tunnels. Funny how in framework it looks fine, but soon as there's a solid mass to look at the appearance changes completely.

So onto the foam!

Last edited by Bellicose; 8th June 2019 at 23:22..
Reply With Quote