Prova suspension parts search
Hi guys,
Just joined the forum. I'm looking for some parts for the rear suspension on a Prova Designs Miura kit.
On the rear suspension, there is an adjustable length link to allow the alignment of the rear wheels to be adjusted. This consists of two rod ends (one bolted to the lower wishbone, the other bolted to the hub carrier/shock absorber) that screw into a 50mm long length of hexagonal bar.
The hex bar is tapped with a RH thread from one end and a LH thread from the other, hence the distance between the end bolts can be varied by rotating the hex bar, hence adjusting the wheel alignment.
I can find the rod ends easy enough, but can anyone suggest a supplier of the hex bar item?
The reason I'm changing it is I've been told the 1/2" x 1/2" rod end can break under serious driving, so should be replaced with a 1/2"x 5/8" rod end.
Cheers guys.
Linz
|