Quote:
Originally Posted by AndyP57
It looks like I'm in the same boat with the handbrake. It won't move so I'll do the same as you and cut the cable. I assume I'm right in that as long as the rear cable isn't wrapped around the hoop the tub can be freed?
|
Yep, so long as you've undone all the other bolts holding the tub to the chassis there's just the handbrake cable routed through the compensator holding it on.
You should be able to move the tub about if all the bolts are undone, but not backwards by more than an inch or two before meeting resistance. With hindsight I'd have undone the handbrake cable at one end and threaded it through or cut the compensator off to save the cost of a new cable later.
Good luck.