Quote:
Originally Posted by molleur
A Momo part # 2008 should do it. A PCD spacer would be needed as you indicated.
I have not tried it yet myself, but that is my plan
(1998 2.8 Z3/250SWB)
Momo indicates the #2008 boss will retain the self-cancelling turn signals as well. A bit pricey too.
|
Hi Molleur, thanks for the inputs etc. This is where it is getting confusing and contradictory. The Momo application guide says #2008 is used for E36 up to 1998. It quotes #2011 as used in E36 all years. As you say these things can be pricey from certain sources and if I get it wrong i’ll be paying more for the hub than the Nardi wheel!
Plus with me trying an e36 hub and it wouldn’t fit the splines is troubling as well.
I have also found #2012 listed as fitting it as well! That is e46 fitment.
Certainly interested to know how the ones who have already swapped over have managed it and what they used/functions after the swap.