you should have a drawing from norman thats got the route of them, and then another drawing that has the hole locations to be drilled in the body. if you havent let me know and ill scan them in.
The pipes are a nightmare to get in the right places so they dont foul things, in the end i foud the easiest way was to have the chassis raised high, and get underneath with the body slightly off the chassis and decide the run of them that way. Ill see if ive got some pix at home of them and post them up if i have.
Accelerator cable goes down the centre tunnel next to the gearchange, then comes up and neatly through a hole in the body just to the left of the spare wheel hole, then up and into the big hole by the pedal.
|