still plodding on with the hotrod most of the wiring is now sorted we have all working lights and it starts and runs on the key and even drives . Utube link below would not let me add a video
https://youtu.be/tG0j64pSCKk
the clutch is pants only just biting and the gears are stiff so I dissed the slave and just used a monkey wrench off the clutch leaver and a bit of rope. all gears fine but only biting at the very top so looks like the clutch is on its last legs but the slave has to go.The piston on the slave dose not travel enough both ways to work the clutch properly.
IMG_20160605_180202.jpg
so next job fit a cable clutch ebay new cable 8quid and a bit of old cross member I came up with this,woks grate but will still need a new clutch bugger.
20170624_122625.jpg
doors rehung again suicide, open and close brill this time I made up my own door handles after the ebay ones were crap, any guesses for what they are yes I know they look rough but its a rat rod
20170625_161032.jpg
20170625_161039.jpg
rear lights from the states
20170521_164223.jpg
exhaust next week I have bought two newish manifolds I am going to direct it under and out the side well thats the plan.