Whilst the body is off and access is good I've done some interior ali panel work. The donor car had a flat tunnel top which is fine when covered with carpet but no good when the ali is the final finish. I've remade it with a radiused top which looks loads better. The bulkhead isn't finished yet, there are fillets to add to the top and sides to meet up with the scuttle panel and body sides. Some of the bulk head is visible when the body is on, especially on the passenger side because there is no dash board. One reason why I wanted a neat job.
Last edited by Lucky@LeMans; 15th November 2018 at 18:27..
|