A few photos here, they are a week or two old in some cases .
* Manifolds fitted to the engine on both sides, fairly straight forward as although the Cologne engine is a V6 there are only 4 exhaust ports in total to connect up. They will be covered in heat wrap and painted black upon completion.
* Mountings for the sill area on the body required some extension brackets from the chassis. These are now filled in with aluminium panels. The lower sill area will be bolted on along these extensions.
* The left and right exhausts here, not quite complete in these photos but not far off. The whole system will be painted in high temp matt black like the original cars.
Last edited by Lucky@LeMans; 1st December 2018 at 14:38..
|