View Single Post
Old 3rd May 2019, 11:08
thecarbuilder246 thecarbuilder246 is offline
Senior Member
Join Date: Jun 2009
Location: leicestershire
Posts: 320
thecarbuilder246 is on a distinguished road
Default chassis

Hi all.

I think you guys may be right in all the extra wheel base length is in the engine bay. I know the original 206 mould was altered to fit the lotus europa chassis and it would appear to me the whole rear of the car was shortened by approx 85mm. I've used a laser and checked the deon wheel base 2255mm (dino 246 2340mm). Some photos of wheel base measurements attached.
I've measure every part of the deon chassis I have and created a wooden mock up which I've had under the cascu shell. Front wheel position and floor pan at the front of the 246 is spot on but it seems deon/jhc cut the chassis rails down and moved the engine cradle forward.
I've cut my wooden mock up in half and I'm going to add in 85 mm and try the cascu shell on again.

Attached Images
File Type: jpg 001.jpg (91.1 KB, 20 views)
File Type: jpg 002.jpg (90.6 KB, 17 views)
File Type: jpg 003.jpg (92.5 KB, 18 views)
File Type: jpg 004.jpg (92.6 KB, 18 views)
Reply With Quote