View Single Post
  #64  
Old 29th November 2015, 16:16
pompeyal's Avatar
pompeyal pompeyal is offline
Senior Member
Enthusiast
 
Join Date: Jun 2008
Location: Fareham, Hants
Posts: 161
pompeyal is on a distinguished road
Default Bonnet continued..

I have cut out 5 ribs and marled out the curvature across the car and cut the profile on each



Then the plug was marked out for the fixing positions then drilled and assembled




When all attached the whole thing was placed onto the car and using brackets and blocks, it was set so the profile was at an equal height off the car





After that I pulled the plug down onto the brackets and then from the underside I made brackets to lock the whole thing to the car, then a coat of primer to seal the MDF in readiness for shaping the sides and front of the bulge and once done I will put a small radius around the edges in readiness for the gel and glass.



Reply With Quote