hi nick you can wire the golf headlights up to work on a facelift get some h4 connectors and cut the existing plugs off the mr2 loom you will have too many wires because the facelift has seperate high/low beam bulbs i cant just remember exactly how i did mine ,its a while ago now ,wozzy was asking me about this a couple of weeks back, i identified each wirend its function with a test bulb ,then took it from there make sure you get the feeds right on the h4 plugs cos they will work if you get the earth on the wrong terminal then you get main and dip on together but very dim i seem to remember not using one of the positive feeds i will have a look at mine and see if i can figure it out might be tricky cos i shrink wrapped the new wires when i got it to work right also i seem to remember swapping the spade connectors around in the h4 plugs for some reason think it was something to do with the earthing , hope this helps regards, mick.
|