It has internal boot hinges, they drop all the way down if the boot lid is not attached so they are not pushing the lid up in any way.
I will shim the front hinge as you suggest.
I had fitted a new boot seal and thought that may be the problem but it sits in exactly yje same way with it removed.
At the moment I think the cure may be to cut some slices in the ribs that run along it and introduce some more cure, that way it should bring the top down and tuck the bottom edge in some, which is what it needs.
Trouble is most of the builds have been hardtops, common as muck!
Last edited by Jaguartvr; 10th October 2016 at 19:22..
|