View Single Post
  #5  
Old 16th April 2020, 13:14
WorldClassAccident WorldClassAccident is offline
Senior Member
 
Join Date: Nov 2011
Posts: 3,558
WorldClassAccident is on a distinguished road
Default

I had a good look around the car and the only places the micro-bubbles really show are across the boot lid which I have sanded back and on the top of the rear wings as shown in the red oval areas


I gave one patch a quick rub with some 1000 grit to see what would happen and it appears that I could sand it flat without cutting right through the paint which would save time and sanding.


If I did this:

A) Would the micro-blisters reappear as soon as the sunshine heats them up gain
B) Would I need to use primer or could I go straight to black paint?


Please remember that this is just an every day driver, not a show car, although I do like showing it off. Also, I will be painting this with Halfords rattle can paint on my driveway outside to set the expectations in case this affects your answers
Reply With Quote