Steering wheel mount finished today.
IMG_6368.jpg
Its made of three main parts to adapt the detachable mount to the original steering column.
IMG_6367.jpg
First an adapter mount was made for the original spline casting, the casting was machined down to size and fixed to the new part with three 6mm high tensile counter sink bolts, basically this made it possible to mount a detachable mount to the original steering column.
IMG_6369.jpg
New base spline mount with the bottom half of the detachable mount fitted to the steering column, the original hex nut was used to tighten this part to the steering column after the bore of the detachable base mount had been opened up.
IMG_6370.jpg
Plate made to attach the steering wheel, two different hole pcd's to match the detachable part and the steering wheel. High tensile counter sink bolts used which will be hidden once the wheel is in place.
IMG_6371.jpg
Steering wheel in place with plain center plate, the horn push was originally here but to make it easier for myself ive now mounted the horn push on the dash. Stainless steel counter sinks hold the steering wheel in place.
Well that's it for now see you all soon.