BIT MORE DONE ... I have added some harness mounts to the framework and floor sections to take Graham's belts he has supplied ... bit tricky to see but they are welded plate with captive nuts welded to them mounted to the lower cross bar and some captive nuts fitted to the frame either side of the dropped pans ...
I am at a point where I think all the welded attachments are done , so opted to paint the frame and floorpans ...We decided to do the tubework satin silver to contrast the red body and I have done the floors black to tie them into the chassis visually ...so off with the frame it was ....
whilst the frame was off I fitted the propshaft that I shortened just over 8''
The tubework is now silver and floors black ....
next job is to patch and modify the front pans to fit the chassis after the 8'' shift backwards ...