Thread
:
Updates!
View Single Post
#
15
10th October 2012, 20:31
Patrick
Senior Member
Enthusiast
Join Date: Feb 2005
Location: Hampshire
Posts: 2,497
Finished off machining the adapter plate today, brought some proper countersinking bits with me! Had to machine down the bolts ever so slightly to fit in to the counter sunk holes.
Bought a rose joint to go on the servo, minor issue bought the wrong thread direction – oops! New one on order
. Also 10mm bolts don’t go through 3/8″ holes by about 0.4mm so ordered some 3/8″ nuts and bolts to use.
Patrick
View Public Profile
Visit Patrick's homepage!
Find all posts by Patrick