Hi all,
Finally I can continue with the build… I have made more modifications on the frame, so I think the front side is done now. I will only add another L shaped brace in the middle of the top bulkhead rail to connect it to the bottom rail (marked with masking tape).
It's all just positioned on the frame at the moment and I just need to finish welding it to the frame. I did not have time to do it this weekend, after measuring and fabricating the parts - I have to do it slowly and generate as little heat as possible, as I have filled the frame with the wax to protect it from the rust at the very beginning of the build...
IMG_2130.jpg
IMG_2128.jpg
IMG_2127.jpg
IMG_2125.jpg
IMG_2123.jpg