View Single Post
Old 31st January 2019, 18:58
micky1mo's Avatar
micky1mo micky1mo is offline
Senior Member
Join Date: Dec 2006
Posts: 1,086
micky1mo is on a distinguished road

The new floor-pan sat high on the chassis so I made a frame to bridge the gap between the chassis and the floor-pan which was about 5".

I also mounted the hand brake and gear stick.

When all was assembled it was obvious the cab was to high.

So the 5" frame work was removed along with a very large chunk of the floor-pan.

I also had to remove some of the lower cab but this left a much more suitable looking fit.

Reply With Quote