Giving you just a load of extra work.
Could you mount a homemade very long bolt on or under the dashboard that would go through the bulkhead and into a home made hole bonded to the the underneath oh the trailing edge of the bonnet? Or they could be mounted on either side in front of the door, similar fixing to the E-Type bonnet.
If the bracket bonded to the bonnet was in two parts you could adjust the height of the hole so when the bolt is pushed through it would hold the bonnet down tight. You could use a bit of self adhesive sponge on the lip to keep it tight and stop it rattling.
Give you a nice change from rubbing down!
|