As I could not trial fit the body this time, I have continued with welding the additional bits on the frame.
I have added the reinforcement to minimize the movement of the pedals plate and done the same on opposite side.
IMG_1727.jpg
IMG_1729.jpg
IMG_1731.jpg
The frame was delivered without the mounting points to the back of the chassis, so I've added those too. This will make everything a bit stiffer and help carrying the weight of the petrol tank when filled with the fuel.
IMG_1732.jpg
IMG_1733.jpg
I will weld it all to the frame later on, as I would like to take the frame of the chassis to be able to turn it upside down to make it easier to weld the bottom side of all added bits.