View Single Post
  #217  
Old 5th November 2018, 08:31
Welshkiwi Welshkiwi is offline
Senior Member
 
Join Date: Aug 2017
Location: Auckland, New Zealand
Posts: 309
Welshkiwi is on a distinguished road
Talking Electrical Extensions completed front end

Well managed to squeeze a few hrs in after work and managed to get the R/H electrical looms in and bracketed. Same as the L/H side used ally fabricated into a bracket and fixed to two screw locations on the bulkhead as well as using one of the captive screws on the "E Box" on the R/H side by the brake master cylinder. Nice and tidy and hopefully out of the way of the clam when I get to put that on. Just a bit of final clipping and permanent labelling left to do.

Roll cage is finally installed and ain't coming out again! Need to tidy around the tubes, fix with custom sized bolts at the rear end and @ chassis tubes to tidy up the locking/finish.

R/H Disconnects and bracket:

RH Disconnect bracket

RH Electrical

RH Quick disconnect

Rollcage Installed:

Roll cage installed 1

Roll cage installed
Reply With Quote