View Single Post
  #4  
Old 23rd April 2016, 13:17
Jaguartvr's Avatar
Jaguartvr Jaguartvr is offline
Senior Member
 
Join Date: Jan 2014
Location: Egham, Surrey
Posts: 1,780
Jaguartvr is on a distinguished road
Default

Thanks for the pictures, I had intended to go with 2 sets of twin slash pipes at the rear but looking at the pictures WCA may be the way to go. It looks identical to my old TVR.
My cunning plan is to make the system up out of pvc waste pipe using set bends, then reproducing it in stainless. Getting the bends right is the tricky bit, cutting the lengths should be straight forward. There are loads of bends and couplers on Ebay.
Looks like it may not be possible to keep the spare although WCA route looks as though it might be possible with a little rerouting.
I was also thinking about adding a short length of flexi pipe on both pipes, simply to act as a rear bumper, as soon as you hear the couch you know you have hit the high kerb. Rather hit the pipes than the bodywork and with a flexi it should take up a small nudge.
Reply With Quote